Options
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Email to a Friend
- Printer Friendly Page
- Report Inappropriate Content
2272
Views
Link copied. Please paste this link to share this article on your social media post.
Select your language from the translate dropdown in the upper right.

Configure SNMPv3 traps and informs in the Gateway

2022-10-25
06:57 AM
Gateway 1.18 and newer supports SNMPv3 traps and informs for discovered APC NMC and third party devices.
Discovered SNMPv3 devices are not automatically registered as trap receivers. The SNMPv3 device must be configured for SNMPv3 traps.
Note: APC NMC devices send traps to every registered trap listener.
1. On the device:
- Create a user profile with the desired authentication and privacy settings.
Need help for APC NMC devices? - Configure the Gateway as a trap receiver.
2. In the Gateway:
Enter the SNMPv3 credentials configured on the device on the Gateway during initial setup or later on the Settings > Device credentials page.
0% helpful
(0/1)
Link copied. Please paste this link to share this article on your social media post.
Didn't find what you are looking for? Ask our Experts