External system integration (on premises only)
Link copied. Please paste this link to share this article on your social media post.
Last Updated: JLehr 2023-12-21 08:42 AM
For ITA on-premises installations only
Configuring Power Monitoring Expert integration is a two sided integration.
Compatibility information: Power Monitoring Expert DC 7.2.2 is supported by ITA.
The below highlighted steps (4 and 5) cover the integration configuration in IT Advisor. The other
steps are to be done on the Power Monitoring Expert side and are referenced in this document to provide an overview of all the necessary steps for the integration.
For further information about the Power Monitoring Expert steps (1-3) please refer to the ETL for ITA documentation attached below.
The PME Management Console allows you to add peripherals to the PME server, such as:
Devices are added to PME by telling which sites these devices are attached to. Sites can be seen as gateways for devices.
Add Sites:
Fill in the details for the selected site.
Note: TCP/IP port is selected in a drop-down list, e.g. for Ethernet Gateway port number is 502.
Add Devices:
Fill in the details for the device to be added.
Note: Unit ID should be same as the Slave number which is defined for the device while adding it to the Ethernet Gateway.
Defining the device hierarchy
The Hierarchy Manager wizard allows you to map added devices to logical data center entities like circuits, electrical equipment, etc. to better define what the meter logically represents. Furthermore, logical devices are exportable through ETL which makes them available to ITA, thus a step should be performed against any newly added devices in PME in order to make them available to ITA as well.
Hierarchy Manager - Circuits & Electrical Equipment
Hierarchy Manager - Circuits
Hierarchy Manager - Electrical Equipment
Hierarchy Manager - Electrical Equipment Asset Name
ETL Engine - SQL database connection verification
ETL Engine - ITA staging database connection verification
Hierarchal Manager sources list import selected
ETL configuration tool - run once
Device Association - Unassociated Devices list
Device Association - new devices in list
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.