You can discover PowerChute Business Edition agents version 9.5 and above in the EcoStruxure IT Gateway via SNMP. Gateway version 1.3.4 or above is required.
SNMP is not enabled by default in PowerChute Business Edition. It must be configured in PowerChute to communicate with EcoStruxure IT. It is recommended you use SNMPv3 because it provides encryption and authentication. SNMPv1 access is available, but is less secure than SNMPv3.
The Gateway must be installed on a network configured so Simple Network Management Protocol (SNMP) traffic is permitted between the Gateway and the PowerChute agents. This may require configuring firewalls and routers to allow SNMP traffic.
You can discover multiple PowerChute agents in the Gateway at once if the same SNMP user profile is configured on all the agents. Otherwise, you can multiple create separate discoveries with different IP addresses or SNMP profiles.