|This article pertains to Gateway versions 1.7.0 and older. See this article for versions 1.8.1 and later.|
Log in to your EcoStruxure IT Gateway.
Click the menu icon, then Discovery.
Click Create Discovery.
In Device Discovery, select the Advanced option, and select the device family that matches your device:
Device type: Crac
Device vendor: Uniflair
Device family: Aquascroll, Ug40mp40_imperial, Ug40mp40_metric
Enter the IP address of the device, and select SNMPv1 or SNMPv3.
- Specify the IP address, and select SNMPv1 or SNMPv3.
For SNMPv1, specify the Read community name (public is default), the Write community name (private is default), and the port, (161 is default).
- For SNMPv3, specify the Username, Authentication type (MD5 or SHA), Authentication password, Encryption type (DES, DES3, AES128, AES192, AES256), Encryption password, and Port (161 is default).
Run the discovery.
Note: Advanced discovery is necessary for only the specific devices listed in this option.