How to register a Smart-UPS using the EcoStruxure IT mobile app

You can use the EcoStruxure IT mobile app to register your Smart-UPS in EcoStruxure IT when you connect it using the SmartConnect port.

Before you begin

• Set up your EcoStruxure Ready Smart-UPS and connect the Smart-UPS to your network using the SmartConnect port. See the instructions that came with your product.

  NOTE: If you connected the Smart-UPS to the EcoStruxure Ready Smart-UPS Portal, you must remove it before you register the Smart-UPS with EcoStruxure IT. 
  See Can I register my SmartConnect-compatible UPS with more than one Schneider Electric account?

• Create an EcoStruxure IT account if you don't already have one.

1. Go to https://app.ecostruxureit.com/manage and click Sign up.

2. Enter your email address, password, and your mobile phone number including the country code.
3. Follow the on-screen instructions to download the EcoStruxure IT mobile app

4. Choose SMS as the authentication method to get a code on your phone to proceed.

5. Create an organization to complete your registration.
   Note: Do not download the EcoStruxure IT Gateway.

Instructions

1. Log in to the EcoStruxure IT mobile app.

   If you don’t have any devices connected to EcoStruxure IT, you'll see this screen. Click Register.	OR	If you have already connected devices to EcoStruxure IT, tap Devices, and tap the three dots in the top right corner. Click Register Smart-UPS.

2. Click Scan QR Code. 

   If you haven’t accepted the Camera permission, you will be prompted for permission before you can use the QR Scanner. 

   Position the QR code on the Smart-UPS label inside the green indicator on the screen to scan it, or you can tap Enter manually to type the ID and Product Key if you prefer.

Once the Smart-UPS is registered in EcoStruxure IT, it can take up to 5 minutes for the first sensor values to be available. Click Show Device Details to view.

See How to remove a Smart-UPS from EcoStruxure IT